Battery
Bearings
Brakes
Bulbs
Chargers
Clean
Covers
Electrics
Exhaust
Fasteners
Filters
Forks
Lighting
Lubricants
Other Categories
Protection
Simota
Tools
Transmission
Tyres
Tools | Carb and Fuel Tools
Designed for those hard to reach air/fuel mixture screws on most multi-cylinder motorcycles. 110 degree angled head , 6cm rise and 46cm length with a flat blade end.
Sizes 0.45-1.30mm in 0.05mm increments,
also includes sizes 1.40mm and 1.50mm.
Up to 250ml
Hose Clamp For Preventing Loss Of Fluid.
Can Be Used On Fuel Hose, Vacuum Hose, Brake Hoses (Non Braided Only) Etc.
Can Be Used On Fuel Hose, Vacuum Hose, Brake Hoses (Non Braided Only) Etc.
An Ideal Tool For FCR Carburettors.
Provided In This 4 Piece Kit: 6mm Hex For Main Jets.
3mm Allen For Removing The Float Bowl.
1 Short Slotted Driver For Removing Straight Slot Pilot Jets.
1 Long Reach Slotted Driver Essential To Reach Into Cavities To Adjust FCR Carburettors.
Provided In This 4 Piece Kit: 6mm Hex For Main Jets.
3mm Allen For Removing The Float Bowl.
1 Short Slotted Driver For Removing Straight Slot Pilot Jets.
1 Long Reach Slotted Driver Essential To Reach Into Cavities To Adjust FCR Carburettors.
Useful must have item, when needing to remove fuel tank to perform maintenance on your motorcycle.
Eliminates need to balance fuel tank in an awkward position.
Simply remove your tank, connect the auxiliary fuel tank, which is gravity fed, and hang it up using the hook provided.
Features 1ltr tank, 950mm hose, two hose clamps and on/off tap.
