• 12 Volt and 6 Volt
• Lead acid, AGM and Gel batteries
• Quick mode change button on front face
• 1 Amp
• Battery Range 1.3-60Ah
• Cable Length 1m (To quick connect plug), 1.1m (Including clamps/eyelet cable)
• Trickle charger
• Quick release plug with cover
• Wall plug compact design
• Weight 0.58Kg

• 12 Volt and 6 Volt
• Lead acid, AGM, Gel and Lithium batteries
• Quick mode change button on front face
• 2 Amp
• Battery Range 1.3-60Ah
• Cable Length 1m (To quick connect plug), 1.1m (Including clamps/eyelet cable)
• Trickle charger
• Quick release plug with cover
• Wall plug compact design
• Weight 0.58Kg

The professional tester suitable for all 6/12V batteries (wet, gel, MF, AGM, VRLA)
from 40 to 2000 CCA (SAE), as well as for 12/24V cranking/charging electrical systems
Easy to use, it provides accurate and reliable results
Fast testing procedure, in few seconds the LCD display shows the test results
as well as a clear recommended action:
A. Good / Pass (battery in good conditions)
B. Good / Recharge
C. Recharge / Retest
D. Bad / Replace
E. Bad Cell / Replace
The device is also suitable to analyse deeply discharged batteries (Voltmeter range: 1.5V to 30V)
In order to minimise the battery drain during the execution of the test,
it's possible to select all the main industry international standards for batteries (SAE, DIN, EN, IEC or JIS)
Patented single load, dynamic resistance technology,
Protective rubber shell, high shock resistance
Practical ABS case for storing and transporting the unit

Non Stock Item Ordered On Request Only

Non Stock Item Ordered On Request Only

Non Stock Item Ordered On Request Only